Alpine Amplifier - MRV-F540 4/3/2 CHANNEL POWER AMPLIFIER Amplifiers

Part ID:	NNC-1916
Price:	£460.00
Make:	Alpine
Type:	Amplifiers
Suitable For:	Universal
Availability:	1-2 weeks
Description: ALPINE MRV-F540 4/3/2 CHANNEL POWER AMPLIFIER Key Features 14.4V RMS Continuous Power 2ohm; Stereo (0.3% THD) 100x4 Bridged 4ohm; (0.3% THD) 200x2 12V RMS Continuous Power 4ohm; Stereo (0.08% THD) 50Wx4 2ohm; Stereo (0.3% THD) 70x4 Bridged 4ohm; (0.3% THD) 140x2 Bass Engine? S/N Ratio 100dBA Frequency Response: 10-50kHz 12dB HP/LP Crossover (15-400Hz) Extra Large Gold Plated Terminals with Wire Insert Capability Top Panel Power LED 4 Volt Input Capability Continuously Adjustable Crossovers DC Straight, STAR Topology DC-DC/PWM MOSFET Power Supply General Independently Adjustable Crossover (HP/LP/BP) Phase Selector 5/4/3 Channel Operation Auto Overcurrent Protection Bass EQ Circuit Bass Engine? DC Straight Design DC-DC PWM Power Supply Discrete Pre-Amp Stage Gold Plated RCA Input Connectors Independently Adjustable Crossover (HP/LP/BP) Input Channel Selector Input Mode Selector Switch Integrated Wire and Mounting Screw Terminals MOSFET Final Outputs MOSFET Power Supply MultiMode Noise Elimination Coil Non-Fading Pre-Amp Output One side Terminal Layout Phase Selector STAR Circuitry Solid Copper Bus Bars Top Mounted Blue LED Power/Status Indicator Bass Engine? Crossover Network : 15Hz-800Hz HP/LP/BP (12dB/oct) Specification Dividing Network : 15Hz-8000Hz HP/LP/BP (12dB/oct) Foot Print (WxHxD)in : 11-13/16" x 2-3/8" x 16-1/2" Foot Print (WxHxD)mm : 300mm x 60mm x 420mm Frequency Reponse : 10Hz-50kHz (+0,-1dB) Heat Sink (WxHxD)in : 9-7/8" x 2-3/8" x 16-1/2" Heat Sink (WxHxD)mm : 250mm x 60mm x 420mm Input Impedance : 10k ohm Input Sensitivity (for rated power) : 0.2 V to 4.0V Power Requirements : 14.4V DC (11V to 16V) Signal to Noise (S/N) : 105dBA (referenced to rated power) Slew Factor : greater than 5 Speaker Impedance : 4 or 2 ohms(stereo), 4 ohms(bridged) MAX Power (at 14.4V,EIAJ) Bridged 4 ohms : 350W x 2 Per channel into 4 ohms : 150W x 4 RMS Power (at 12V,20Hz-200Hz) Bridged 4 ohms : 140W x 2 Per channel into 2 ohms : 70W x 4 Per channel into 4 ohms : 50W x 4 RMS Power (at 14.4V,20Hz-200Hz) Bridged 4 ohms : 200W x 2 Per channel into 2 ohms : 100W x 4 Per channel into 4 ohms : 80W x 4
Available Options: No other options available.
Additional Information: These units are compatible with UK cars and in most cases the radio frequencies received are also compatible. In the case of a unit that can't receive normal UK wave bands, the unit will be supplied with a band expander (included in the price) in order that you can receive all stations.
Image: