Alpine Amplifier - MRV-F450 5/4/3 CHANNEL POWER AMPLIFIER Amplifiers

Part ID:	NNC-1915
Price:	£299.00
Make:	Alpine
Type:	Amplifiers
Suitable For:	Universal
Availability:	1-2 weeks
Description: ALPINE MRV-F450 5/4/3 CHANNEL POWER AMPLIFIER Key Features 14.4V RMS Continuous Power 4ohm; Stereo (0.08% THD) 50Wx4 + 4ohm;200Wx1 Stereo (0.3% THD) 2ohm; Stereo 60Wx4 + 4ohm; 200Wx1 4ohm; Stereo 120Wx2+ 4ohm; 200Wx1 12V RMS Continuous Power 4ohm; Stereo (0.08% THD) 30Wx4 + 4ohm;150Wx1 Stereo (0.3% THD) 2ohm; Bridged 40Wx4 + 4ohm; 150Wx1 4ohm; Stereo 80Wx2 + 4ohm; 150Wx1 Bass EngineR S/N Ratio 100dBA Frequency Response: 10-50kHz 12dB HP/LP Crossover (30-400Hz) Subsonic Filter Extra Large Gold Plated Terminals with Wire Insert Capability Top Panel Power LED 4 Volt Input Capability Continuously Adjustable Crossovers DC Straight, STAR Topology DC-DC/PWM MOSFET Power Supply General Adjustable Crossover (HP/LP) Bass EQ Circuit Phase Selector Subsonic Filter 5/4/3 Channel Operation Adjustable Crossover (HP/LP) Auto Overcurrent Protection Bass EQ Circuit Bass EngineR DC Straight Design DC-DC PWM Power Supply Discrete Pre-Amp Stage Gold Plated RCA Input Connectors Input Mode Selector Switch Integrated Wire and Mounting Screw Terminals MOSFET Final Outputs MOSFET Power Supply MultiMode Noise Elimination Coil One side Terminal Layout Phase Selector STAR Circuitry Solid Copper Bus Bars Subsonic Filter Top Mounted Blue LED Power/Status Indicator Bass EngineR Crossover Network : 30Hz-200Hz HP / LP (12dB/oct) Subsonic Filter (Selectable) : 50Hz 0 - + 12dB Tuned Bass EQ (Variable) : (Ch5) 50Hz Off, 15Hz, 30Hz Specification Dividing Network : 30Hz-200Hz HP/LP (12dB/oct) Foot Print (WxHxD)in : 11-13/16" x 2-3/8" x 16-1/2" Foot Print (WxHxD)mm : 300mm x 60mm x 420mm Frequency Reponse : 10Hz-50kHz (+0,-1dB) Heat Sink (WxHxD)in : 9-7/8" x 2-3/8" x 16-1/2" Heat Sink (WxHxD)mm : 250mm x 60mm x 420mm Input Impedance : 10k ohm Input Sensitivity (for rated power) : 0.2 V to 4.0V Power Requirements : 14.4V DC (11V to 16V) Signal to Noise (S/N) : 100dBA (referenced to rated power) Slew Factor : greater than 5 Speaker Impedance : 4 or 2 ohms(stereo), 4 ohms(bridged) MAX Power (at 14.4V,EIAJ) Bridged 4 ohms : 240W x 2 + 370W x 1 Per channel into 4 ohms : 90W x 4 + 370W x 1 RMS Power (at 12V,20Hz-200Hz) Bridged 4 ohms : 80W x 2 + 150W x 1 Per channel into 2 ohms : 40W x 4 + 150W x 1 Per channel into 4 ohms : 30W x 4 + 150W x 1 RMS Power (at 14.4V,20Hz-200Hz) Bridged 4 ohms : 120W x 2 + 200W x 1 Per channel into 2 ohms : 60W x 4 + 200W x 1 Per channel into 4 ohms : 50W x 4 + 200W x 1
Available Options: No other options available.
Additional Information: These units are compatible with UK cars and in most cases the radio frequencies received are also compatible. In the case of a unit that can't receive normal UK wave bands, the unit will be supplied with a band expander (included in the price) in order that you can receive all stations.
Image: